Car Alarms: Prestige Car Alarm, cold air intake, prestige car

Question
today i installed a cold air intake on my ford focus heres how everything went.

-had to take out the batter and the thing that holds the battery in.
-installed intake
-insured EVERYthing was back the way it was
-tried to start the car
-CLICK CLICK CLICK CLICK.
when i try and start it all i get is clicking.
when i press the big black button to unlock it, it unlocks, then relocks automatically. ive tried pressing the button for 5 secs before the i start it and it does nothing. i can get the doors open in the time that its unlocking and relocking but thats it. trust me, nothing under the hood is wrong. help!

Answer
Please try to locate the valet switch
to overide the alarm.

If you would read some of the previous
posts I made on this subject, you will
see the procedure to toggle into and out
of valet/override mode. It allows
you to set and reset the starter kill mechanism
as well as all other standard alarm features.

This should also apply to yours.

Good luck with it. Should do the trick.

ALARMTEK
CARALARMSTORE.COM