Car Alarms: alarm on 2005 Honda CR-V, valet mode, honda cr v

Question
I recently had to change out the battery on my vehicle. I have reset all my systems but it appears the security system in not working the same. My remote still locks/unlocks the doors, but it is no longer chirping when the when I use the remote. How do I reset it so that it is an audible alarm.  

Answer
Should be no problem really.
It appears from your expaination, that the
car alarm is in service mode.

Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
DELUXESERVICE.com