QuestionI just bought this nissan,I have original alarm,security and immobilizer.the light on LED(not on Dash) indicator stays on steady when I turn the switch on,it blinks when the switch is off,then when is on the steady,the regular security is functioning normal(Led is Functioning normal at dash),car wont start,i want to disengage the immobilizer,I have checked the whole syestem,everything is okay,fuses are ok,but car wont start
AnswerOk, if you want to disable the "factory" alarm,
locate the orange/blue |-| pin 30 at SECU
(Smart Entrance Control Unit) located to
the passengers side of the steering column.
Splice into it and then put to ground.
This terminates the factory alarm. You should
be ble to start the car if you have the
coded ignition key. Without it, you would
need to buy either a new key at Nissan and
have it programmed there, or get a databus
keyless bypass for 63.50, and permanantly
bypass the Transmod immobilizer. Weighing
the cost is of course up to you.
That's the soulution choices I can offer
to get your car going.
Let me know what happens.
