Car Alarms: alarm blocking ignition system, wire splice, guage wire

Question
I HAVE A EXPLORER 99 MANUAL TRANSMISSION AND THE CAR COMES WITH FACTORY ALARM, I DO NOT HAVE THE REMOTE SO WHEN I IGNITIATE HORN GOES OFF AND NOT START.THE ONLY WAY NOW I START IT IS  PUSHING THE CAR TO START IT.
I CHECK ALL THE FUSES AND THEY WERE OK.
ANY IDEA BECAUSE MY SON IS GETTING TIRED OF HELPING ME PUSHING THIS CAR

Answer
The dk. green/purple factory disarm wire
is in the harness to the drivers
door, inside the drivers kick,

Locate this wire, splice
into it with the same guage wire,
then ground it to a solid chassis point.

This takes out the factory alarm for however
long you keep this wire grounded.

It is the only way I know of to get around
the factory alarm system in this truck.

If it's an aftermarket system,
then that's another story.

Let me know what happens.

A.