Car Alarms: Viper car alarm Model 300, honda accord, car alarm

Question
I disconnected my viper main connection and now nothing comes on. I can't start my car because it has totally disabled it. I can't find the valet button and my remote is gone. I was trying to disconnect it because I was going to try and remove it. But now, I'm not sure where to go from here. The car is a 1999 honda accord. How do you remove it completely or how can I at least get the car to start?
thanks,
jerry

Answer
If the car won't start, it's not the alarms fault.
This car has a transponder in the ignition and
will require the coded key to start it.

More then likely it's part of what you removed.

Best suggestion is to put it all back together,
put the alarm into valet/overide mode once
powered up, and get to an alarm technician to
remove it.

Sorry, but the Viper possible has the coded
ignition key in it's module box, and
will need a Viper tech to get it done right.

Good luck.

ALARMTEK