Question
-------------------------------------------
The text above is a follow-up to ...
-----Question-----
i am installing a remote start/ keyless entry on a 98 plymoth grand voyager 3.3 there was not any type of system previously installed. the manufacturer of the kit is from BOA security. I waited on the phone for 6 hours to get technical support and it was during normal business hours and never talked to anybody. anyway me and 2 of my buddies can not determine what type of door lock system in on the grand voyager. it gives you like 8 different types to choose from and the closet one we could come up with was the type H (-) multiple system anyway we got it hooked up and still nothing works not even the start portion of the kit. but thank god everything still works normaly and am still able to drive it. i am 100% sure the ignition part is hooked up correctly
-----Answer-----
Jesse,
Go to my site www.RELAYHELP.com
See the Caravan door lock system.
It is a single wire, that does both
through a resisted relay setup.
Power Lock : WHT/DK.GRN BCM AT FUSE BOX
Power Unlock : WHT/DK.GRN WHT PLUG B58 CONN
You will see how they are supposed to be done
for this application.
Happy installing.
PS.
I am the fastest tech support service
of this kind on the web. 12 years now and
still going! Tell your friends!
Regards.
ALARMTEK
ALARMTEK.net
do i have to take off the BCM to wire this Power Lock : WHT/DK.GRN BCM AT FUSE BOX and is this located on the bottom of the fuse boxand is this system a type A,B,C,D,E,F,G(+)multiplex, H(-)multiplex
AnswerThis is a single wire resisted negaitive trigger door lock
system. Not really certain it has a letter designation.
And no, on the black overtape on the harness on the
bottom of the BCM, closest to the left side kick panel,
you will locate the white/green wire in the middle front
when you peel back the tape. Isolate from the others
so you can work and then apply the relay diagram I sent you earlier, and find 2 points on the white/green wire about an inch apart to tap.
That's it.
A.
