Car Alarms: 95 Jeep wrangler factory Alarm questions, stage shock sensor, jeep wrangler

Question
Well I'm pretty sure the alarm I already have will do what I want it to do.. I just need to figure out what wires do what.  the same alarm was used on others that did flash the lights and have a dash LED.  I was just hopeing you might have the info I needed.   as for the alarm working with the doors off.  This one does do that.  I pull the plugs when I remove the door (have to do that anyways to keep the dome off) and the alarm will go off if someone gets in the jeep.  
-------------------------------------------
The text above is a follow-up to ...

-----Question-----
I have a 95 jeep wrangler with a factory alarm.  or atleast a mopar alarm.  From what I can find out is that its come kind of code alarm.  What I'd like to know is how can I make it flash the side marker lights and add a blinking dask LED to the alarm.  Or can I?  The Alarm works great and is set perfect for my softtop jeep.  I just want to make sure others know it has an alarm.
-----Answer-----
There are devices, I carry one here, (al-100) that
can be used to interface with another alarm, to
add some other functions but it's not the easiest
piece to interface for your purposes.
I can do ya one better.

Go look at this www.PAGINGALARM.com

The 777 is just the thing on this truck. Comes
with a super bright blue LED that if placed
correctly, will be seen from anywhere! Very cool,
and it pages you if anyone messes with the truck.
(up to 1000 feet)

I can show you how to use it without door pins too!.
(using the include 2 stage shock sensor, or an
optional microwave movement/motion detector.
So you can take off the doors and still get
good, solid protection.

Easy install too.

I did this same alarm on many Jeeps
here in the Tampa bay area, and for the money,
it's VERY functional for this application.

This will work in congress with the mopar.
No need to give that up if you like it.

Let me know if I can set you up with this system.

Regards.

ALARMTEK
PAGINGALARM.com

Answer
There is always adding a hyper LED
which would work with any alarm that has a starter kill
output on it. Not sure of the mopar.

the parking lights though, I don't know that
can be done unless the output exsists.

My suggestion is to locate the specs on the mopar
to see what it's cappable of that was not installed.

I hope it works for you.

A.