Car Alarms: micro startC2003, microwave sensor, shock sensor

Question
Hi I wanted to know if the alarm i have is a good alarm, its a micro startC2003 it seems to do all it said it would do, i also wanted to add a microwave sensor to it can i do this and keep the shock sensor or do i have to remove the shock sensor and install the other. and would i be able to just plug this unit right in or change some wires im not sure of the brand of microwave sensor is but it is new and comes with the wiring diagram.thanks

Answer
It's a fine, basic security and remote start with keyless. I sell them and like them very much. To add a motion sensor to this, and include the 2 stage shock, see diode isolating the wires at www.RELAYHELP.com

If the plug for the motion sensor is the same as the one in the c2003, then it should plug n play, but no guaranty
there since you say it is not the Micro brand.

I hope this helps.

ALARMTEK
STARTBYREMOTE.com