Car Alarms: Alarms, alpine rd, alarmtek

Question
Ah okay, What kind of tools is needed to install your system?  Estimated time to put it in?  Detailed instructions?  What do you mean be here virtually?  Can I send in a money order or check?

Answer
Well, the tools are a drill with phillips tip,
and a 1/4 inch to 5/8 in drill bit selection,
a simple 12 volt test light, black electrical tape,
wire cripper/cutter/stripper, about 3 to 4 hours
for a novice installer in time, and the wiring notes
I would send you upon payment for the truck.

What we are dealing with is 7 to 8 wires:
CONSTANT POWER
IGNITION (SWITCHED) POWER
GROUND
PARKING LIGHT FLASHING WIRE
DOOR TRIGGER WIRE
STARTER WIRE
RUNNING THE SIREN WIRE THROUGH THE FIREWALL
and of course if you want to add a motion sensor,
(simply plugs into the brain box)
that would be 36.00 on top of the 59.95 + 9.99 s&h
for a total of $105.94 complete.

You can send a money order if you wish
to:
ROBERT MARTIN
4040 ALPINE RD.
LAND O' LAKES, FL. 34639

Or, I can send a paypal click to pay link
to expedite and send it tomarrow morining.

My Virtual installer service goes with it.
I can be reached either by online chat exchange
at any of the 50 or so links on my sites,
or by phone during business hours if you have
install questions, but it's really not so bad.
You can do this if you are at all handy.
It's like stereo work, with a different slant on
the end result. Can be fun too!

Let me know which way you'd like to go.

Robert Martin
ALARMTEK
www.USCARALARM.com