Car Alarms: White wire for Black Widow BW 2150, side kick panel, pontiac sunfire

Question
Hi!  I've recently installed the Black Widow BW 2150 alarm system to my 99 Pontiac Sunfire and I'm have one more wire to connect which has me a little confused.  It's the white wire which is supposed to be connected to the parking lights.  I've been looking at the wiring diagram for my car but can seem to figure out which wire I'm going to splice into to have the lights work properly when I arm/disarm the system.  If you need me to email you the diagram to my car I will, just let me know.  Thanks!!!

Answer
Ok, find the brown wire in the drivers
side kick panel going back towards the rear of the car.
Take a test light, ground the clip and then
probe the brown wire. You should get nothing.
Keep the test light on the brown wire, and
then turn the light switch half way. This will
turn on the 12 volts to the brown wire and the
test light will light up. That's your
parking light wire. Connect the white from
the Black Widow
directly to this wire.

Have a good evening.

ALARMTEK
CARALARMZ.com