Car Alarms: car wont start, dash area, car wont start

Question
ALARMTEK,
    I have a 1995 Acura Integra Special Edition.When i bought this car it has already an alarm and i dont know if it is factory installed or some other else.I try to start my car but it won't.And i found out that the alarm light keep blinking.So,my guess is that probably i need to change my battery.My problem is when i try to put the battery the alarm sounds and i dont know how to turn it off.Can you pls help!!!!!Thanks.

Answer
Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area,
until the installed LED (the blinking light)
in your dash area comes on solid.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

That should do it.
If you want to remove it at this point,
take it to your neighborhood installer
for this, or buy the wiring chart for
the vehicle, and reverse engineer it wire
by wire, until it's safely removed.

Let me know what happens.

ALARMTEK
STARTERDISABLE.com