Questionok one more guestion is this a whole new unit and if so do you got any type of web page about it or so kinda specs to it or something i can see what i am getting?-------------------------
Followup To
Question -
ok now you got my attention for the new unit that is 89.95 is that a whole alarm, remote start , and control for door locks?
please let me know and i do thank you for the help -------------------------
Followup To
Question -
well think you i do have the viper and i have had it for about ten years i have a viper 300 too but the 600hf is on the 94 chevy and it does do the door locks. and what is the remote start slave you are talking about?
and the better system you have in mind? please let me know and i do not have the book for the 600 hf i downloaded a install guide for it and put it in and the install guide is just basic. thank you travis white Followup To
Question -
i was wondering if the viper 600 hf can do a remote start and if so how i can do it? or am i going to have to add somthing to the unit?
i would like to use the same 4 button remote to start the vehicle as i do the arm and unarm it
thank you travis white this is a 94 chevy 1/2 ton pickup auto trans
Answer -
Sorry Travis but I don't do DEI equipment so I
can't say if the 600HF has that capapbility.
If it turns out to be just a car alarm/keyless entry,
#1 you would need 2 relays for the door locks, and #2,
you will need to add a remote start slave unit (59.00)
to the 600HF to use the remotes you have currently
to remote start the truck. Let me know if you already
have that unit, and if you read the booklet
on it to determine if it remote starts too.
If not, I have a better system in mind with all
of it built in.
ALARMTEK
ALARMTEK
Answer -
The easiest option if the 600hf does not have remote start,
would be adding the Micro slave start. Simply put,
the (-) aux output on the 600 would control the add
on remote start module (slave)
The Ultrastart 2250tl is my choice for this one though.
It's an all in one unit, not and "add on" to an older system. It would give you 1000 ft as opposed to the 500
for the Micro slave, and is 89.95 currently.
Best option really since you plan on doing the whole
package in the next vehicle, and newer in this case
is better. After 10 years, I don't know that I would trust
the 600hf at this point. But it's not my call.
Let me know if any of this interests you and we'll
narrow down to the best choices for your vehicle.
ALARMTEK
Answer -
Yes to all of your questions on the Ultrastart.
Copy the link below, and if
you get it tonight, I can ship in the morning,
and I will throw in a starter kill relay
for free!
https://www.paypal.com/xclick/business=installsupport%40aol.com&item_name=1+ULTRASTART+2250tl+1-starterkill+relay&item_number=1+ULTRASTART+2250tl+1-starterkill+relay&amount=89.95&no_note=1¤cy_code=USD
I know you'll like it! Easier to install then the
600 & slave is for sure!!
A.
AnswerNext day. 9/22/04 (9:05am EST)
Travis,
I am about to raise the prices for the winter months
on ALL remote starters I sell. If you are interested
in the Ultrastart 2250 tl for your installation,
today would be the last day at 89.95 and a free
starter kill relay and socket.
copy cut n paste the following link
to get it now:
https://www.paypal.com/xclick/business=installsupport%40aol.com&item_name=1+ULTRASTART+2250tl+1-starterkill+relay&item_number=1+ULTRASTART+2250tl+1-starterkill+relay&amount=89.95&no_note=1¤cy_code=USD
Tomarrow, the price is going up to 99.95 and no
freebies. I wanted to give you a chance at this price
as discussed, but only for today. If not, good
luck with you project, and I hope you can get
some install support from Viper on your installation.
Yours.
ALARMTEK
CARALARMSALES.com
