Car Alarms: Remote trunk release, hatch release, amp fuse

Question
1997 Camaro
Installed Commando 520 s car alarm. Cannot get trunk relese to operate from remote. Negative pulse from alarm Positive trunk release, wired relay and connected to motor side of switch, blows fuse!

Answer
Probably the wrong locale.
Try the TRUNK/HATCH RELEASE|black/white |+|
at the relay near passenger kick panel.

Set up the relay like this:

aux (-) from the alarm to pin 86
87 and 85 to 10 amp fuse then to constant 12 volts
pin 30 to the black/white wire
cut 87a

That should do it.

ALARMTEK