Car Alarms: viper car alrams, car alrams, dash area

Question
I have a 94 ford f150 witha viper car alarm. I almost run out of gas one night but made it to the gas station on fumes. Now the truck doesnt want to run. I wondered if maybe the alarm system had a fuel shut-off of some kind that might be cuasing some poblems?

Answer
Answer:  Ok, try this.
   Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area in most cases,
until the installed LED (the blinking light)
in your dash area comes on solid.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

That should do it.

Let me know what happens.

ALARMTEK
AUTOPAGER.com