Car Alarms: car will not start, dash area, tercel

Question
I am trying to disarm the alarm that came with my '97 Tercel. The battery is no longer working in the only keyless alarm I received with the car when I purchased it secondhand. I have tried to replace the 12v but to no avail. The alarm seems to be still malfunctioning. I am trying to find out how to disarm the alarm so that I can start my vehicle. It will not start without the alarm. Any help would be greatly appreciated.  

Answer
Ok, try this.
   Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area in most cases,
until the installed LED (the blinking light)
in your dash area comes on solid.

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

That should do it.

Let me know what happens.

ALARMTEK
DELUXESERVICE.com