Car Alarms: car alarm is engaged, car wont start, toyota camry, dash area

Question
1995 toyota camry.....I went to turn the car on.....nothing at all, turn the key off and the alarm keeps going off, therefore the key is in "on" position so the alarm will not keep going off.  Is there anyway to disengage this, or simply cut a wire?

Answer
Ok, try this.
   Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area in most cases,
until the installed LED (the blinking light)
in your dash area comes on solid.

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

That should do it.

Let me know what happens.

ALARMTEK
AUTOPAGER.com