Car Alarms: 1994 Jeep Grand Cherokee Alarm, jeep grand cherokee, side kick panel

Question
Help!!
My Jeep alarm(factory installed) seems to go off when ever it feels like, we don't know how to disable it can you tell us how?

Answer
If it's the factory alarm, you would
need to find the factory disarm wire
in the drivers side kick panel
area, and ground it permanantly.
(purple/yellow wire in black plug).

This will solve this issue for good.

But if it's an aftermarket system,
try this:

Look under the dash area, maybe to the left
foot area in the plastic, for a button/switch
that does not look like the OEM factory equipment.

Now put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the button until
the installed LED (the blinking light)
in your dash area comes on solid.

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

That should do it.

Let me know what happens.

ALARMTEK