Car Stereos: car audio, chrysler concorde, 1995 chrysler concorde

Question
i put a jvc stereo in a 1995 chrysler concorde with the infinity sound system, i have power but no sound at all, the factory stereo has sound when i hook it back up,

Answer
Hi Todd,

With the Infinity system, you need to make sure you hook up the correct wires to the aftermarket harness you installed with the deck so that the factory amplifier turns on.

The wire should be blue on both the deck's harness as well as the new harness you put in.

If there is a green/black wire that was connected to the factory radio, you will need to connect that to a ground point behind the deck, or tap it into the black ground wire in your new harness; this grounds out the infinity amp.

Justin