QuestionQUESTION: Hi. the wire that connects the teminal and the cone togeather snaped can it be sodered back togeather? or is there a another way to fix it?
ANSWER: Hey Tyler
Depending on where it broke, you should be able to solder it together. What kind of speaker is it and where did it break?
Dave
---------- FOLLOW-UP ----------
QUESTION: It is a rockford sub 10inch and it broke on the negative on the cone connection not on the terminal
ANSWER: Hey Tyler
Depending on how it actually broke (I'd have to look at it) I'd say the best thing to do is replace the entire wire. If the speaker wasn't that expensive, I'd just go get a new one. If you can't figure out how to replace the wire, getting a professional to do it might cost you more than the speaker is worth. Sounds to me like your only option is to replace the wire or get a new one. I don't think you'll be able to resolder the wire. If you do, it will make a stiff point and probably break again (or rip your cone).
Hope that helps
Dave
---------- FOLLOW-UP ----------
QUESTION: ok but is there any way i can send u a picture? the speaker is worth kinda a pretty penny so i would like to get it fixed.and i also have a 10inch pianeer and it broke on the voice coil is it fixable?
ANSWER: If you'd like to send a picture, send it to:
davidreese77@yahoo.com
I'll take a look and see if I can help.
Thanks
Dave
---------- FOLLOW-UP ----------
QUESTION: i will get the pic to u as fast as i can. but can my pianner 10inch subwoofer the one part of the voice col broke can it be fixed?
AnswerHi Tyler - I don't know if it would be worth it to fix your sub with a broken voice coil. It would be expensive and probably cost more than your sub. Bring it to a repair guy and see what he says. I doubt he'll want to fix it unless your sub was over 300 bucks.
I wouldn't try to fix it yourself. If you want to, call pioneer and see if they sell the parts and a exploded diagram. Truthfully, it's probably just not worth it.
Dave
