Car Stereos: amp wiring, hyundai santa fe, toggle switch

Question
hi, i wired an amp for the first time last night and it works sweet when the key is in acc postion, i put my remote on a toggle, ran a wire from the battery, grounded to a bolt right near the amp.
when i start the car (04 hyundai santa fe) the amp turns off and will not turn on. no fuses blown. can you help? appreciate it much.

Answer
Adam, does it still work sweet in acc position?  Does it work in run position?  Without starting the car, turn the key to run position.  If the amp is working fine in this position, it should work while the car is running.  If it only works in acc position, your remote wire may not be hooked to the correct switched wire.  If you are running your remote from the battery as well, be sure the toggle switch is turned on.  It, definitely, sounds like a wiring issue, so just make sure all connections are made correctly.  Hope this helps, Scott