Car Stereos: Kenwood RadioKDC-X791 & Kenwood Amp KAC-8403, kenwood amp, kac

Question
How to wire these up with the TWO kicker compvtsubwoofer Enclosers That I have? I also need help on what to set all these settings on in the radio way to many for me to understand.The set now is the Amp is Bridge 4ohm 500x1. The speakers are 4ohms impendence. The bridge is to 2ohm impedance.The Amp is getting Hot What to do with setting on amp also. Thanks Kevin

Answer
Hi Kevin,

If the subwoofers are 4ohm each, wire them in parallel to the amplifier which will bridge it down to 2ohms and will be fine.

I can't tell you exactly what settings to set because that changes based on what you want, the specific amplifier, etc.  All you need to do is turn everything down, hook it up, and then slowly turn it up until it sounds good, and isn't distorted.

It's completely normal for the amplifier to get hot.  If it gets too hot for the amplifier's safe operation, it should shut itself off, so don't worry about that.

Justin