Car Stereos: amp and subs, watts rms, 4 ohms

Question
hey man

im looking at buying a lanzar vibe286 4000 watt amp specs are as fallows:
1 x 4000W MAX at 4 OHMS Bridged
2 x 2000W MAX at 4 OHMS
2 x 1000W RMS at 4 OHMS
2 x 1650W at 2 OHMS RMS
Electronic Crossover Network
Bass Boost Circuit
2 Ohms Stereo Stable
Anti-Thump Turn-On
Illuminated Top Panel
Soft Turn On/Off
High & Low Level Inputs
Power & Protection LED Indicators
Advanced Protection Circuitry
Remote Control Bass Booster
THD: < 0.04%
S/N Ratio: >90dB
Channel Separation: >65dB
Freq. Response: 15Hz~35kHz
Dimensions: 11.06"W x 2.24"H x 17"

and i will go to Pioneer Premier TS-W3001D2
12" 3000W Dual 2-Ohm Subwoofer times 2 with specs as fallows:
Sensitivity: 89 dB
RMS Power Range : 1000 Watts
Peak Power Handling: 3000 Watts
Impedance: Dual 2 Ohm
Low Frequency response: 18 Hz
High Frequency Response: 700 Hz
Diameter: 12 Inch
will these items work togeather for a low bass sound that will shake my truck hard?  

Answer
Hi Brett,

That amp seems like too much power for a single Pioneer subwoofer.  If you're using two subs, the amplifier should match up pretty well, however.

If you're planning on using only one sub, I'd look for a mono amplifier rated for around 500-1000 watts RMS at 1 ohm.

Brian