QuestionWould you direct me to a web site that can show me step by step on how to fix an electric Window? I know the motor is working but the cable is broken. Does this mean that I have to replace the whole thing? What would be the inexpensive way to fix the window?
AnswerHi
I'll send you the GM procedure, less pics and hyperlinks.
You CAN now get just the regulator, although I will warn you, it is VERY tricky to replace regulator AND OR motor.
But that is how they come now.
Guess would be between 125.00 to 150.00 for regulator only?
Justa guess.
I Hope this helps
Follow post back, if needed.
Pawl
Raise and support the window glass.
Remove the trim panel. (Remove the door handle bezel. Refer to Inside Door Handle Bezel Replacement .
Remove the window handle, if equipped. Refer to Door Window Regulator Handle Replacement .
Remove the power accessory switch panel. Refer to Power Accessory Switch Panel Replacement .
Remove the upper extension of the trim panel. Refer to Trim Panel Replacement - Upper Extension .
Remove the manual lock lever from the trim panel using a flat bladed tool.
Remove the trim panel screws.
Remove the courtesy lamp, if equipped. Refer to Door Courtesy Lamp and Reflector Replacement .
Remove the trim panel from the door. Carefully slide the trim panel up in order to release the retainers from the door.)
Remove the water deflector.
Disconnect the harness from the electric window motor assembly.
Remove the 2 bolts that hold the window glass to the regulator.
Remove the bolts from the window regulator.
Remove the window regulator assembly from the door by folding both sides of the window regulator assembly together.
Remove the window regulator motor.
