American Motors: Dash lights, fuse block, fuse panel

Question
I can't seem to get the dash lights to work.  All the fuses in the fuse block are good and I know that at least one bulb is good as I replaced one.
Is there a fuse on the circuit board or between the black and the board?  Is there a place on the board where I can see if there is power?  Thanks

Answer
If all of the dash lights are out, it is usually a fuse or the headlight switch. I do not have a fuse panel diagram, so the best thing to do is grab a test light, turn on the parking lights and start checking each fuse. If all the fuses are OK, remove the headlight switch and check for power & ground. Also, make sure the headlight switch is rotated all the way as it controls the intensity of the dash lights.