Audio Systems: gm 6 disk in dash cd changer, radio one, dash cd

Question
so i added an Ipod interface module so i can control my ipod from the factory deck, that works great however i didn't read the part about ejecting all the cd's prior to removing power to the unit,that's the reason you should read all the instructions prior to starting a job like this. now the deck shows no disk's loaded and it wont eject or load. is their an easy fix or do i need to pull the unit and manually remove the cd's from the changer?

Answer
you need to pull the radio again , and remove all the disc out of the radio one by one, be very carefull not to move the plates out of their correct position make sure the radio is flat on a table or the dash before you connect the power plug

good luck