Audio Systems: setting clock on pioneer DEH2400F, clock set, time settings

Question
I can not for the life of me figure out how to set the clock on my stereo, all the other functions work great but can't get clock set, I checked the pioneer site and can't find any info on setting clock, short of waiting till 11:58 pulling the fuse and replacing it, please help me as it is driving me nuts and i use the clock to time my commute

Answer
Go to:

http://www.pioneerelectronics.com/pio/pe/vgn/images/portal/cit_11221/49989operat...

and then to page 15 for the instructions.

Or you can refer to your own manual that comes with the unit - - - which reads:

Setting the time
This is used to set the time on the unit’s clock
display.
1 Press SOURCE and hold until the unit turns
off.
2 Press AUDIO and hold until TIME appears
in the display.
3 Select the portion of the time display you
wish to set with 2/3.
Pressing 2/3 will select a portion of the clock
display:
HOUR—MINUTE
As you select portions of the clock display the
portion selected will blink.
4 Select the correct time with 5/∞.
Pressing 5 will increase the selected hour or
minute. Pressing ∞ will decrease the selected
hour or minute.
• To cancel time settings, press BAND.
• You can also cancel time settings by holding
down AUDIO until the unit turns off

Hope this helps.