Audio Systems: New Pioneer System, infinity system, stock speakers

Question
First of all sorry this is long...
Ok im about to install a Pioneer Deck (DEH-P6700MP) into my 02' Dodge Durango WITH the Infinity System in it(It was inao till they totaled my truck, I pulled the wiring out all the way to the black and grey plugs in the dash). But the stock speakers are FUBAR and im looking at upgrading them to some pioneers(Front = TS-A1702C and Rear = TS-A1683R) and ive selected the Amp GM-6300F for them. My question is How do I go about hookin em all up? I think ive got all the power stuff worked out but its just pugging what into what and since my current durango has the infinity will i have to do something special to hook all this up?

My head unit has 50wX4 Max so im sure thats not enogh to power the aftermarket Pioneers.  But the head unit does have an RCA SW Left + Right and a F Left + Right.
Am I correct in thinking ill just run an RCA from the head unit "F" to the amp ive selected and have Y RAC adapter so the RCA splits for Channel A + B, then just run the speaker wire to the speackers ive selected? Fronts on channel A and rear on channel B?
I know how to do the sub I already have so thats no problem and i think i know how to split the power for the amps.

Thanks a LOT!!!
Sorry this was so long!


Answer
Hey Garrett,
As long as you are not trying to use the factory gear along with these new upgrades, this is not too hard to do.
Now that you have the deck, amp and speakers the best resolve is to yank the Infinity head, amp, speakers and harness then just upgrade to the new gear. Since your Pioneer deck has a wireless remote, you can get an adapter at crutchfield.com which lets you retain and use the steering wheel controls. 1-800-319-8264
I may be mistaken but if you installed all of this gear would there anything remaining (which you use) that is Infinity?

Good Luck.

JM