Audi Repair: Audi Allroad Flashers 2003, flat screwdriver, audi allroad

Question
Hi, my blinkers are flashing intermittently so i purchased a flasher to replace the defective.  Can you tell me how to remove the trim piece in which the flasher is housed without breaking it?  thanks

Answer
hello
Trim has about 6 clips, there is no special tool or way to remove it, you just have to pry it out.
I use 90deg. small pick , go under the trim on right side and pry one side out. Just go easy , do not use any flat screwdriver you will damaged trim ,if it's wood.
If any of the clips brake off, don't worry - it will be OK
good luck             pltech