QuestionQUESTION: I would like to find a reference to look up what the codes are that i have pulled from the pcm. I would also like to ask why you may think that the codes wont clear from the system? I followed the procedure that should clear the codes from the climate control panel. and the codes dont change. current or history. thank you for your help.
Cory
ANSWER: Tell me what codes you got and I will tell you what they mean and how to clear them.
---------- FOLLOW-UP ----------
QUESTION: I pulled codes (in this order) p023 history, p025 history, p083 history, i052 history, a040 history, no sir codes, no tcs codes, s036 history, s044 history, s062 history. I tried to clear them with the "clear codes" prompt to no avail. I replaced the idle speed actuator because it was clicking and stripped, I also replaced the throttle body seal at the same time only cause i had to. helped a little but it still has a pretty bad idle surge on cold start, and no matter what temp the engine is it has a stumble from just off idle to approx. 25% throttle. once warmed up it idles fine and beyond quarter throttle drives fine and has no misfires. thank you
Cory
ANSWER: OK, Let's try and clear all these HISTORY codes.
1. Re-enter back into the climate control panel and after all the codes display the display will stop at PCM?
2. Push and release the FAN UP (^) button on the climate control panel and you will see PCM DATA?
3. Keep pushing and releasing the FAN DOWN (v) button until you see PCM CLEAR CODES?
4. Push and release the FAN UP (^) button and you will see PCM CODES CLEAR?
5. Wait 5 seconds and then keep pushing the OFF button until you see PCM?
6. Push and release the FAN DOWN (v) button and you will see IPC?
7. Push and release the FAN UP (^) button on the climate control panel and you will see IPC DATA?
8. Keep pushing and releasing the FAN DOWN (v) button until you see IPC CLEAR CODES?
9. Push and release the FAN UP (^) button and you will see IPC CODES CLEAR?
10. Wait 5 seconds and then keep pushing the OFF button until you see PCM?
11. keep Pushing and releasing the FAN DOWN (v) button and you will see ACP?
12. Push and release the FAN UP (^) button on the climate control panel and you will see ACP DATA?
13. Keep pushing and releasing the FAN DOWN (v) button until you see ACP CLEAR CODES?
14.Push and release the FAN UP (^) button and you will see ACP CODES CLEAR?
15. Wait 5 seconds and then keep pushing the OFF button until you see PCM?
16. keep Pushing and releasing the FAN DOWN (v) button and you will see SIR?
17. Push and release the FAN UP (^) button on the climate control panel and you will see SIR DATA?
18. Keep pushing and releasing the FAN DOWN (v) button until you see SIR CLEAR CODES?
19. Push and release the FAN UP (^) button and you will see SIR CODES CLEAR?
20. Wait 5 seconds and then keep pushing the OFF button until you see PCM?
21. Push the AUTO button to get out of diagnostics.
22. Turn ignition OFF for 15 seconds.
23. Re-enter diagnostics and see if any history codes re-appear.
NONE of the history codes should re-appear.
You will need simple Test procedures and picture locations of the components within the system that is causing you idle problem of which can't be done on this website which only allows one picture. I do not have a website so you will have to e-mail: onlineautohelp@msn.com in order to obtain the information on the IDLE RE-LEARN PROCEDURE.
---------- FOLLOW-UP ----------
QUESTION: I completed the list and everything was cleared out thank you. My problem is that the P023 history , P025 current, and P083 history came back on shortly after. could you tell me what those are?
AnswerP023 = ignition control circuit problem.
P025 = 24x reference signal low.
P083 = 24x signal high.
You will need simple Test procedures and picture locations of the components within the system that is causing you idle problem of which can't be done on this website which only allows one picture. I do not have a website so you will have to e-mail: onlineautohelp@msn.com in order to obtain the information
