QuestionQUESTION: My ABS Light is on , Can I read the codes and clear them myself? I just installed new pads on the front,new drums, shoes, and wheelcylinders on the rear. Can I access the codes on the climate control panel or is that engine/emissions only?
ANSWER: You can get the codes from the climate control panel.
You most likely pulled a sensor wire loose when you were working on the brakes. Recheck all the wire connections at the wheels FIRST and then access the computer codes.
---------- FOLLOW-UP ----------
QUESTION: I've checked all wire connections...... can you tell me how to get the ABS codes from the climate control panel ?
How do I clear the codes after making repairs ? Where can I find the table of codes ?
thanks,
David
Answer1. Ign ition ON. Engine OFF.
2. Simultaneously push and hold the OFF and WARMER buttons on your climate control panel for 3 seconds and release them.
3. Write down EVERYTHING you see on the fuel data display EXACTLY as it appears and it will stop when you see .7.0
4. Turn ignition OFF.
5. Tell me what you saw.
