Cadillac Repair: 1987 coupe cadillac third brake light, stop lamp, screws

Question
how do you replace the bulb on the third brake light.

Answer
Hi Ronald,

      If you haven't already replaced the bulb this is what you need to do.

      Remove the 2 screws from the base of the housing. Turn the stop lamp housing so you can see and remove the connector. Then remove the 2 screws on the underside of the housing near the red lens. The halves will separate and then the bulb can be twisted and replaced. Then just put it back together and reinstall it in the car.

    Hope that makes sense. Bill