Chevrolet Repair: front hub assy, correct torque, hub assembly

Question
When replacing the front hub assembly on my 2004 Chevy classic does it matter if it has abs. This car does not and it seems that all the replacement hubs have an abs wire hook up. can i still use the hub and just not hook up the abs wire.The engine is a 2.2L ecotech

Answer
HI BILL, YES YOU CAN USE THIS HUB ASSEMBLY, IT IS THE SAME.. BUT WHY WOULD YOU WANT TO SPEND THE EXTRA DOLLARS ON THE ABS SENSOR WHEN YOU DO NOT NEED TO ???  I WOULD CK AROUND TO OTHER PART STORES TO SEE IF YOU CAN GET THE CORRECT BEARING ASSEMBLY...ALSO AFTER REPLACING THE HUB MAKE SURE YOU TORQUE THE AXLE NUT TO THE CORRECT TORQUE SPEC. FAILURE TO DO SO WILL PREMATUREUALLY [[DONT KNOW IF THAT IS SPELLED CORRECT]] CUT THE BEARING LIFE INHALF...VERY IMPORTANT. I HOPE THIS HELPS YOU,WITH ALL OF MY SPEELING ERRORS...TOM