Question-------------------------
Followup To
Question -
I've checked/replaced the oxy sensor and tuned
the car, but after "pushing" the motor to higher
speeds the "check engine" light appears and will
not go off until car is turned off. Also after
starting for the first time (after cooling) the car
starts fine, but if shut-down and restarted, each
start then becomes tougher and tougher, as if
needing more gas/ oxygen. this still occurs tho'
i've also (twice) changed ignition module with no
difference...
Love the car, hate the "naggy" problems
Mark
Answer -
First thing is that it appears that you are GUESSING and replacing unnecessary parts in hoping to fix the problem.
What CODE(s) are you getting from the computer when the check engine light illuminates ?.
autohelp
If i HAD the code, or ability to find it, i wouldn't NEED to ask you.
That's why i AM guessing.
I thought you could help-
AnswerThere are up to 50 + codes that could be stored in the computer, I am not psychic and can't tell you what codes are in there.
With your attitude and your looking for expert FREE advise, Tell you what to do. Ask someone else IF you can find anyone else who will help you for hours with your vehicle problems for free.
I'm sure your local dealer will be glad to charge you $100.00 per hour to work with you.
We VOLUNTEER our expertise for FREE on this website that is NOT owned by us, We just like to help and I certainly don't need to take the time with someone with an attitude like yours.
autohelp
