Chevrolet Repair: Heater hose to manifold, heater hose, chas

Question
I have a piece broke off from heater hose to manifold////I tried an EZ out but it won't budge..piece is broke off in manifold

Answer
Hi Chas,
Well, that might be a tough one.
I doubt you can get in there with a drill.
A Dremmel grinder might work to grind through one side inside the tube. Then a tiny chisel to work it out of there.
Don't get too rough with the grinder, cause you don't want to grind a groove in the manifold.
I believe that tube just taps in with a hammer. I really don't know if it is threaded and screws in or not.
I would look real close, and maybe even get hold of a new one to be sure.
Van