Chrysler Repair: crankshaft sensor plug wiring

Question
i need to know the order of the wires in the clip that connects the crank shaft sensor to the engin wiring harness.what colors in order if u were lookin at the top of the clip

Answer
Hi Jon,
What is the year, model, and engine (L) of the vehicle?
Usually the one on the left is the operating voltage (5 or 8 volts, orange color or violet/white, pin 1), the middle wire is the sensor ground (black/light blue, pin 2) and the right side is the signal ware (gray/black, pin 3). But let me know the specifics of the vehicle must in case.
Please read the PS below and respond to it.
Thanks,
Roland