Chrysler Repair: 95 3,3L minivan: no start, engine controller, fuel pump

Question
3.3L V6 chrysles minivan.. vin#1B4GH44R8SX595470. HI, this van it cranks but it wont start, i have power to all relays but no power to ignition coil or fuel pump. i try to scan it but it wont read it...  it seems that i have no power coming out from the computer. Thank you..

Answer
Hi David,
Turn the ignition switch:"on-off-on-off-on and leave on" doing that in 5 seconds or less elapsed time. Then watch the check engine light, which remains 'on', to see it begin to flash, pause, flash, etc. Count the number of flashes before each pause. Then repeat the process to be sure of an accurate set of flash counts. Then tell me counts in order of appearance as these are fault codes which the engine controller had recognized and that may well esplain your no start.
Roland