Chrysler Repair: 2006 chrysler sebring 2.4 engine sedan coolant problems, engine coolant leak, cylinder head gasket

Question
Roland Sir.. It took 3 days to fix.. Heres the work they did? also gave me a 90 day warranty..

R&R Cylinder head gasket, Resurface Cylinder head, Valve job Cylinder head, Head gasket set, New Water pump, New set of spark plugs, New oil filter, motor oil, New oil pressure switch, New timing belt....  Please help sir!!

Answer
Hi Debbie,
If you are still loosing coolant, and if the 0128 code is new since the repair, and if there is still bubbling in the cooling system, or in fact if any one of these three issues is present, then the repair was not effective in solving the problem. So take it back tomorrow and have them figure out what is the cause of the continuing problem and expect that they will do whatever else is necessary to solve it at no further cost to you. Be courteous but firm in your expectations of them. There is either still head gasket leak or some other internal engine coolant leak which they should have found and repaired when they did the work on it.
Please let me know what happens. And if you would be so kind as to rate/nominate me that would be appreciated.
Roland