Chrysler Repair: removing interior panels from liftgate: 06 Pacifica, chrysler pacifica, private option

Question
I am attempting to install a back up camera on the liftgate of my 2006 Chrysler Pacifica.  I need to remove the panels from the interior of the liftgate to route some wiring.  Any help with the process would be greatly appreciated as I do not want to cause any damage during the removal.

Answer
Hi Joseph,
First you have to remove the upper trim panel that surrounds the window, then remove about 8 screws that hold in the lower trim panel. I can copy three pages from the manual and attach them to an email. To do that I need to know your email address as while you tell that to the Allexperts site that information is not shown to the experts. So use the 'private' option of a follow-up question and tell me there what is your emgail address.
Roland
PS Please 'rate' my answer, and where you see the question about a nomination of me to be 'volunteer of the month' consider giving a 'yes' response.
Thank you