Chrysler Repair: 1997 sebring convertible, stop lamp, wire connector

Question
how do I change the 3rd brake light bulb on a 1997 sebring convertible.

Answer
CENTER HIGH MOUNTED STOP LAMP (CHMSL)
REMOVAL
1.Remove upper deck molding. Refer to Body, for proper procedure.
2.Remove screws holding CHMSL assembly to upper deck molding Center High Mount Stop Lamp
3.Remove trunk trim panel as necessary to disengage CHMSL wire connector.
4.Separate CHMSL from upper deck molding.
INSTALLATION
1.Position CHMSL to upper deck molding.
2.Engage CHMSL wire connector and reposition trunk trim panel.
3.Install screws holding CHMSL assembly to upper deck molding.
4.Install upper deck molding. Refer to Body, for proper procedure