Chrysler Repair: Chrysler A606 Transmission question., solenoid pack, correct orientation

Question
I have replaced the solenoid pack in the tranny of my 2003 300M and when I removed the valve body in order to remove the solenoid pack, there were to pistons, four springs, (two big, two small), and two ball bearings that fell into the catch pan.  I think I have been able to figure out which way the pistons go along with the correct orientation of the springs but I can't figure out where the two balls came from.  I've tried checking online but have not been successful in finding this info.  Thanks in advance for any help that you are able to provide.

Answer
Hi Steve,
Yes, the locations of balls are shown in one of the drawings, but even better there are about 15 pages on the valve body disassembly and assembly that I can copy from a CD that I have and then could attach those to an email. To do that I need to know your email address which I am not routinely shown by the AllExpert site. So send me a follow-up question in which you list that address in the text and be sure to use the 'private' option or it will be automatically erased.
Roland
PS If you like I can send the one page with the drawing promptly and then begin on copying the rest of the pages if that would be of help. Let me know. The process takes a couple of minutes per page.