Chrysler Repair: 94 LHS Body control module removal, perforated lines, kick pad

Question
QUESTION: I have:

removed the right end cap (cover)
remove the trim panel and pull carpeting back exposing the liner (on the ground the passenger's feet go)
then removed the screw and push

I have not cut dash liner along perforated lines and back dash liner because I don't see one.

ANSWER: The dash liner apparently covers the body control module so that is why you cut it. unfortunately there is no figure that shows the cuts. Have you found it? It is 'above the right kick pad' according to the manual, and below the dash.

---------- FOLLOW-UP ----------

QUESTION: I have found it and have taken the screw out and pulled the pin. I can get the pin out the hole but the whole module is too large to come out below the knee brace area.

Answer
Hi Toby,
I haven't done this myself so can't give you any further suggestions. I wonder whether you can get to the plugs, or remove the plugs where it stands now. Also, are you certain that you want to start on this troubleshoot at the bcm because of the other possibilities I mentioned?
Roland