Chrysler Repair: 99 town and country: abs hcu tube assignments, brake tube, tube connections

Question
HI ROLAND HATE TO KEEP BOTHERING YOU,BUT COULD YOU TELL ME WITCH 2 PORTS ON THE ABS UNIT ARE THE SUPPLY FROM THE MASTER CYL.IT SHOULD BE THE TOP 2 OR BOTTOM 2 PORTS ON THE ENDS I THINK ONE IS IN THE WRONG SPOT. I KNOW U ARE SENDING THE PICTURES AND I WIIL SEND U THE POSTAGE BUT I WOULD LIKE TO GET THIS BACK ON THE ROAD. THANK YOU FOR THE HELP.

Answer
Hi Bill,
Figure 27 on page 5-101 of the '98 manual shows there to be 6 brake tube connections on the hydrualic control unit. Four are in order from left to right: right front, left rear, right rear, left front.
Above those four are two tubes: from left to right: primary, secondary from the master cylinder. I don't know for sure about the '99 but I do see the same arrangement in the '02 manual for the hydraulic control unit (hcu). I hope this is responsive to your needs. There appears to be a 'legend' that shows the tube assignments in the nearby structural element. Do you not have 6 tube ports on your unit?
Roland