Chrysler Repair: Replacing drivers side window switch, power window switch, bezel assembly

Question
I need to replace the drivers side window switch on my 2006 Chrysler Town & Country. Can you tell me how to remove the door panel on the drivers side to gain access to the window switch?

Answer
REMOVAL
1. Disconnect and isolate the battery negative cable.

2. Using a trim stick, start at the bottom of the switch and bezel assembly and pry up to remove the switch and bezel assembly from the door trim panel Fig. 1 .

Fig. 1 - POWER WINDOW SWITCH  
1 - DOOR TRIM PANEL  
2 - POWER WINDOW SWITCH AND BEZEL ASSEMBLY  


3. Unlatch the locking tab on the harness side connector of the switch.
4. Disconnect wire harness connectors from switch.