Chrysler Repair: keyless problem, chrysler sebring jxi, chrysler sebring

Question
QUESTION: Both my keyless fobs stopped working. I put new batteries and nether work.  How can I check or fix the receiver part?

ANSWER: year/make/model?

---------- FOLLOW-UP ----------

QUESTION: 1998  Chrysler sebring jxi convertible

Answer
Hi Michael,
I assume that the power door locks still work by means of the switches and key locks, if not let me know.
That being the case, check fuses 5,9,11 in the fuse box behind the left end-cap of the dash. Those fuses should all show 12v even when the ignition is 'off', so check that both sides of those fuses show 12v.  Those power the body control module which is the center of the system, including the receiver. Other than that, a readout with a diagnostic readout box will be necessary to further diagnose the problem. Let me know the details of the situation and that the fuses all check out.
Roland
PS Please 'rate' my answer and where you see the question about 'volunteer of the month' consider a 'yes' answer if this response if helpful. Thanks