Chrysler Repair: 99 LHS no spark, spark coils, check fuse

Question
HI I can crank the engine but it will not start the fuel pump runs and pumps fuel, the shutdown relay is off. The manual said if it is off the cam or crank sensor are not working. I tested both and are normal. I don't get a error code or check engine light. Is there a manual reset or am I missing something else? It is a 1999 Chrysler LHS V6 3.5L

Answer
Try pulling the ASD relay and put a jumper from the back pin to the front pin. That will start the fuel pump and the power to the spark coils. Then try and start it and see if it runs well. Of course don't drive around with it that way for long because it is dangerous in the event of an accident. If it runs well, then there is an issue with the actuation coil of the relay, if not then there is probably something wrong with one of the sensors or check fuse N (30 amp), front row, outboard most. That powers the relay coil and the ASD output voltage.
Roland
PS Sorry for the delay in answering but I just found your question in the 'pool' to which it had been referred by the other expert, Kevin.