Chrysler Repair: cooling sys.bleeding: 2,7L, chrysler sebring, xerox copy

Question
Hello, on a 2003 Chrysler Sebring with a 2.7 eng, is there a trick to bleeding this system ,what are the steeps to ensure proper cooling system operation after a thermostat change , thanks

Answer
Hi Dave,
Earlier this month I answered your question about your car and hope that is is repaired now. I have a favor to ask:
I am competing to be recognized as 'volunteer of the month' at this site. Would take a moment to click on the "Thank/rate the expert" button below?  You will then see a question which asks whether to nominate me for that award. If you then click on "yes" that would give me another vote. Thank you for your help.
Roland

Hi Dave,
The procedure is 15-steps and covers a page and half of the manual. I would prefer to xerox copy and postal mail it to you, free. Please tell me a postal mailing address. You do have to open the bleed valve and also there is a funnel (Miller Tool No. 8195)  with a split input (liquid 'in'; air 'out') and also a clip to apply to the return tube to the overflow chamber of the pressure bottle while filling it. But the detailed instructions would be best to have.  
Roland
PS:Please 'rate' my answer and consider me for nomination to be 'expert of the month'. Thanks
Sorry for the delay as I just found your question in the 'pool' to which it have been referred.