Chrysler Repair: 1999 chrysler concorde 3.2: no start, 1999 chrysler concorde, chrysler concorde


Question
when i first started having problems thought i had bad gas , stalld out changed plugs and ran great. about 2 months later it happened again changed plugs like 6 different times in a 6 month period. you will be driving down the road it runs great but all the sudden it stalls out and it takes about 3 to 5 days before it will start back. i showed that it was miss firing on 1 2 and 3 so i changed those boots and coil packs it ran for a little while then same problem, so i changed the cam sensor and crank sensor... i ran it about 200 miles that day never had any problems got up next morning got about 5 miles from house and the same thing..... i am at lost the diagnostic machine says that nothing is even stored on the computer.....plz help me

Answer
Happy New Year, Terrie!
May I ask for your help?
I need your vote of confidence.
I'm in a close race to be recognized as 'Volunteer of the Month' at Allexperts
Purely symbolic, but it means alot to me.
Please click on "Thank/rate the expert" button below/left
It will take you to a page which asks "Would you like to nominate this expert...?"
Click on the "YES"
That's it.
Thanks for taking a moment to help a fellow Chrysler-owner.

Roland

PS: Do it now, the contest closes at 6pm central time.



Hi Terrie,
When it won't start, check whether fuses 1,4,8,14 in the fuse box behind the dash are showing voltage when the ignition switch is in the "run" position. That would verify that four necessary sections of the switch are working properly.
Roland