Chrysler Repair: chrysler, chrysler town and country, acceptable result

Question
There are two flashing lights in the bezel on my 1998 chrysler town and country for the air conditioner. They just flash. sometime they stop and sometimes they don't. Is this a code

Answer
COOLDOWN TEST ENTRY
TO INITIATE TEST:
Set Blower motor ON HIGH
Open all A/C outlets
Depress A/C and WASH buttons simultaneously for 5 Seconds (Until all LED's light)
RESULTS:
All LED's will turn on for 5 Seconds.
Cooldown test is running if A/C and RECIRC are alternately flashing.
Acceptable result is when LED flashing stops.
Calibration Diagnostics and Cooldown must be run separately.