Chrysler Repair: 1999 300M analog clock, analog clock, distribution outlet

Question
Is the analog clock on the dashboard replaceable or is it part of the panel that includes air vents? How do you remove the panel?

Thanks

Answer
CLOCK
REMOVAL
Open hood.
Disconnect and isolate the negative battery remote cable.
Using a trim stick (special tool #C-4755), gently pry out instrument panel air distribution outlet bezel that retains the analog clock.
Disconnect the one wire connector to the clock.
Remove bezel from vehicle.
On the bench, remove two retaining screws to analog clock and remove from bezel Analog Clock Removal
INSTALLATION
For installation, reverse the above procedures.