Chrysler Repair: 95 3.5L missing, code numbers, concorde

Question
95 concorde with a 3.5 not firing on cylinders 3,4,5

Answer
Hi Lou,
Do a fault code readout using the ignition key:"on-off-on-off-on and leave on" doing that in 5 seconds or less elapsed time. Then watch the check engine light, which remains 'on', to begin to flash, pause, flash, etc. Count the number of flashes before each pause. Then repeat to assure an accurate set of counts. Group the counts in pairs in the order of appearance to form 2-digit fault code numbers. The last number is always 55 which means 'end of readout'. Write back with the other numbers and we'll go from there.
Rolsnd